Omnia Silicone Mold 2.0 DUO

The Silicone Mould 2.0 is ""tailor-made"" to fit Omnia Mini Oven. The Silicone Mould 2.0 is an evolution of the original model and features thicker material, is stiffer, and ends approximately 5 mm below the top edge of the aluminium mould. All designed to better withstand slightly higher temperatures. The mould is made from BPA-free silicone, meets FDA standards (US Food and Drug Administration) and LFGB standards (Food and Feed Code).

• Before using the silicone mould for the first time, it should be washed in warm water with detergent and dried thoroughly. The inside should be greased with oil or fat to enhance the mould's natural non-stick properties. The mould should be washed with detergent before each use to reinforce the non-stick properties. Wash and dry after use.
• The silicone mould is placed in the Omnia aluminium mould before pouring in the ingredients.
• Freezable and can be used separately in the microwave and is dishwasher safe.
• Avoid sharp utensils, scouring pads, and similar items.

Warning: as the silicone mould and Omnia oven become very hot, always use
oven gloves or equivalent when handling.
Note! The temperature range is min -30˚C and max +260˚C. Excessive temperatures will damage the silicone mould. The mould must not come into contact with an open flame, must not be placed on the stove or under the grill. Follow the instructions for Omnia regarding handling.