Hatches 50*50cm

Are you looking for a slightly larger roof hatch? 500x500 mm is a standard hole size that applies to both motorhomes and caravans.

How do I know what size my existing roof hatch is? No problem, read below!
Do you need to replace your old roof hatch? Measure the mounting hole and roof thickness where your existing roof hatch is installed. Start by removing the lower frame. Then you can easily measure the widths of the mounting hole and the roof thickness. You measure the roof thickness from the bottom edge of the inner ceiling to the top edge of the outer roof. With these measurements, you can easily navigate to a suitable hatch. Unfortunately, we do not have a register where we can see what type of roof hatch is installed on your specific motorhome or caravan.
Please note that all our roof hatches are measured based on the mounting hole the actual cover and lower frame are larger.